Laser Engravers · Co2 laser · Desktop

xTool P2S

Name: xTool P2S
Brand: xTool

Researched lab test pending

55 W desktop CO2 laser with a 600 x 305 mm bed, dual 16 MP cameras, autofocus and pass-through.

Paid link: we may earn a commission; it never changes our picks.

On paper, suited to

Based on published specs, not lab results.

Manufacturer-published figures unless noted. See sources below.

Spec sheetxTool P2S — manufacturer-published specifications
Other specs
Connectivity	USB, Wi-Fi
Software	xTool Studio; LightBurn (no camera/autofocus support)
Weight	45 kg
Laser
Laser type	CO2 (glass tube)
Laser output power (optical)	55 W
Wavelength	10,600 nm
Spot size (manufacturer-rated)	0.15 × 0.2 mm
Work area
Work area	600 × 305 mm
Extended work area	Up to 3000 mm long (AutoPassthrough)
Max material height	71 mm
Performance (manufacturer-rated)
Max engraving speed (manufacturer-rated)	600 mm/s
Rated cut depth (wood, one pass)	18 mm
Rated cut depth (acrylic, one pass)	20 mm
Metal marking	Coated or anodized metal only; stainless needs a marking spray (per xTool FAQ)
Cuts clear acrylic	Yes
Features
Enclosed	Yes
Air assist	built-in
Camera	Dual 16 MP (close-range + panoramic)
Autofocus	Automatic (LiDAR ranging)
Rotary support	Yes
Pass-through	Yes
Fume handling	Built-in 145 CFM exhaust fan with exhaust pipe
Safety
Laser safety class	Class 4
Flame detection	Yes
Emergency stop	Yes
Physical
Machine dimensions	1000 × 639 × 268 mm
Power consumption / adapter rating	700 W
Input voltage	100-120 V AC

What we'll measure when this machine is in our lab. No results yet.

Lab slotengrave_speed_real
Real-world engraving speed on a standard test file
Measurement pendingWe'll measure this on a unit we buy ourselves and publish the raw data. Read the protocol for Real-world engraving speed on a standard test file
Lab slotcut_depth_3mm_ply_passes
Passes needed to cut 3 mm basswood plywood
Measurement pendingWe'll measure this on a unit we buy ourselves and publish the raw data. Read the protocol for Passes needed to cut 3 mm basswood plywood
Lab slotpm25_1m
PM2.5 at 1 m while engraving
Measurement pendingWe'll measure this on a unit we buy ourselves and publish the raw data. Read the protocol for PM2.5 at 1 m while engraving
Lab slotnoise_dba_1m
Noise at 1 m (dBA)
Measurement pendingWe'll measure this on a unit we buy ourselves and publish the raw data. Read the protocol for Noise at 1 m (dBA)
Lab slotfocus_accuracy
Autofocus / focus repeatability
Measurement pendingWe'll measure this on a unit we buy ourselves and publish the raw data. Read the protocol for Autofocus / focus repeatability

Every spec and number on this page links back to where it came from.